Grinding mill - LM vertical mill
LM Series vertical mill is an advanced grinding machine, which is developed on the basis of home & abroad high technology and production experience combination of various mills. It is an ideal device that integrates crushing, drying, grinding, and grading conveying all together.
Technical Advantages:
1. Low invest cost
2. Low run cost
3. High drying ability
4. Easy to operate, reliable performance
5. Stable quality
6. Convenient to maintain
7. Environmental protection
Model |
LM130K |
LM150K |
LM170K |
LM190K |
LM220K |
LM240K |
|
Turnplate diameter (mm) |
1300 |
1500 |
1700 |
1900 |
2200 |
2400 |
|
Capacity (t/h) |
10~30 |
13~40 |
18~57 |
23~72 |
36~114 |
41~128 |
|
Final product size |
μm |
170~45 |
170~45 |
170~45 |
170~45 |
170~45 |
170~45 |
mesh |
80~325 |
80~325 |
80~325 |
80~325 |
80~325 |
80~325 |
|
Final product water percentage |
≤1% |
≤1% |
≤1% |
≤1% |
≤1% |
≤1% |
|
Max. input size (mm) |
<38 |
<40 |
<42 |
<45 |
<50 |
<55 |
|
Best water percentage of raw material |
<4% |
<4% |
<4% |
<4% |
<4% |
<4% |
|
Drying needed if water percentage is more than |
<15% |
<15% |
<15% |
<15% |
<15% |
<15% |
|
Input wind temperature (℃) |
<350 |
<350 |
<350 |
<350 |
<350 |
<350 |
|
Output wind temperature (℃) |
70~95 |
70~95 |
70~95 |
70~95 |
70~95 |
70~95 |
|
Main motor power (KW) |
185~220 |
250~280 |
355~400 |
450~500 |
710~800 |
800~900 |
|
Overall dimension |
L mm |
3500 |
4200 |
4700 |
8500 |
10200 |
11700 |
W mm |
3400 |
3900 |
4500 |
5600 |
6700 |
7700 |
|
H mm |
5800 |
7100 |
8300 |
8800 |
10600 |
12200 |
|
Weight (t) |
48 |
75 |
90 |
100 |
125 |
160 |
|
Note: 1. Input material should be brittle material with Mohs hardness not more than seven.
2. Hot air is needed only when there is a requirement that water percentage of final product should be less than raw material.
3. If the material is hard to grind, motor power take large value.